|
|
| MACHINE DESCRIPTION |
14" x 72" Landis Model CH Sine Bar Roll Grinder, 1956, Rebuilt by Abbott in 1992, M-4423
MODEL: CH || S/N: 558-25 || YEAR BUILT: - |
| SPECIFICATIONS |
| Capacity: | 14" x 72" | | Swing Over Bed: | 15.5" | | Max. Roll Length: | 72" | | Max. Roll Weight: | 1,000 lbs. | | Machine Weight: | 15,000 lbs. | | WORKHEAD | | Workhead Type: | Dead | | Workhead Speeds, Programmable: | 0 - 300 rpm | | Workhead Horsepower: | 3 HP | | Workhead Motor and Drive: | Baldor AC Vector | | Workhead Taper: | #13 B & S | | WHEELHEAD | | Max. Grinding Wheel Size: | 18" x 1-1/2" x 5" std. | | Wheel Speeds, Programmable: | 0 - 1,500 rpm | | Wheelhead Horsepower: | 15 HP | | Wheelhead Motor and Drive: | Baldor AC Vector | | INFEED | | Wheelhead Infeed: | AC Digital Servo | | Infeed Increments, Programmable | .0000 10" - .004" | | Feedback: | Heidenhain Scale | | Infeed Control: | Control Automation | | TABLE | | Table Traverse Speed, Variable | 0 - 300 ipm | | Traverse Motor and Drive: | Baldor AC Vector | | FOOTSTOCK | | Footstock Type: | Handwheel | | Footstock Center: | #13 B & S | EQUIPPED WITH: - 2 Sine Bars for crowning capabilities
- 3 work rests with fine pitch adjusting screws for Sendzimir Rolls (Manual rests)
- 2 Wheel mounts
- 2 Carbide Tipped Centers
- Amp and RPM meters
- Tailstock mounted wheel dresser with diamond
- Coolant splash guards
- Operator's and parts manual
|
|
| COST |
Price:
P.O.R.
F.O.B. Alton, Illinois |
|
