Photos not actual, but similar to machine offered here.
.jpg)
.jpg) |
| MACHINE DESCRIPTION |
18" x 120" Landis Fanuc 160i CNC Roll Grinder, M-4369
Model: 4R-H (Heavy Pattern) || S/N: 852-15 || YEAR BUILT: 1975 |
| SPECIFICATIONS |
| Max. Swing Over Bed: |
19 15/32" |
| Max. Part Length: |
120" |
| Minimum Workpiece Diameter: |
0.0" |
| Length of Bed: |
19'0" |
| Length required for Max. Table Traverse: |
23'3" |
| Depth Required: |
8' |
| Machine Weight: |
20,500 lbs. |
| WORKHEAD |
| Workhead Type: |
Dead |
| Workhead Speeds, Programmable: |
0 - 150 rpm |
| Workhead Horsepower: |
3 Hp Baldor AC Vector |
| Workhead Drive: |
Baldor AC Vector |
| Workhead Taper: |
#14 Jarno |
| WHEELHEAD |
| Maximum Grinding Wheel Size: |
30" x 3" x 12" standard |
| Wheel Speeds, Programmable: |
200 - 1000 rpm |
| Wheelhead Horsepower: |
25 Hp Baldor AC Vector |
| Wheelhead Motor and Drive: |
Baldor AC Vector |
| Spindle Diameter at Bearing: |
4.5" |
| Spindle Bearing Type: |
Microsphere |
| INFEED |
| Wheelhead Infeed Motor: |
AC Digital Servo, 2.3 Kw |
| Infeed Gearbox Reduction Ratio: |
100:1 |
| Infeed Increments, Programmable: |
.0000 10" - .004" |
| Infeed Ballscrew: |
80mm Precision Ground Double Nut |
| Feedback: |
Heidenhain Scale |
| TABLE (CARRIAGE) |
| Table Type: |
2 Piece with Taper Adjustment |
| Inches Per Foot: |
2 1/4" |
| Degrees Included Angle: |
10 |
| Table Traverse Speed, Programmable: |
0 - 240 ipm |
| Traverse Screw: |
80mm Ballscrew Precision Ground Double Nut |
| Traverse Feedback: |
Heidenhain Scale |
| Traverse Motor: |
AC Digital Servo, 4.5 kw |
| Belt Reduction Ratio: |
2:1 |
| FOOTSTOCK |
| Footstock Type: |
Hydraulic |
| Footstock Center: |
#14 Jarno |
| MACHINE ACCURACY CAPACITY |
| Parallelism (Taper) Overall: |
+/- .0002" |
| T.I.R.: |
+/- .0000 50" |
| Surface Quality: |
0.025 - 1.0 micron Ra depending on wheel (belt) |
CONTROL SPECIFICATIONS:
- GE/Fanuc 160i CNC with Computer Express Industrial PC Front End, Windows 2000 O/S, 2.8 Ghz Pentium 4, 15.1" Resistive touch Active Matrix Screen, 512Mb Ram, 40 GB Western Digital hard drive, 1 PCI half size slot, 1 Combo PCI/ISA half size slot, 2 ISA half size slots, 1 ISA full size expansion slot, floppy drive 1.44 Mb, 3.5", 48X CD-Rom, Separate type Stealth FA Full keyboard, Pointing device - NEMA4, PS-2 compatible.
- High Speed Serial Bus including Type II PC PCB, Basic Operation Package Function, Extended D/L Function, Software Operator's Panel Option
- PMC-SB5 with 8k steps
- Least Input Increment of 0.0000 10"
- Manual Handle Interruption
- Manual Pulse Generator
- Manual override of all feeds and speeds
- Bell Shaped Accel/Decel after Interpolation for Feed
- Programmable Data Input (G10)
- Custom Macro
- Interruption for Custom Macro
- Additional Custom Macro Common variables
- Macro Executor
- Analog Spindle Interface
- 640m Part Program Storage
- Operators Panel connection unit
- Ladder Edit for HSSB Function
- Special G code Input
- 10 Slot Horizontal Base Unit
- Digital Input Modules
- Digital Output Modules
- I/O Link Cable 10m
- 1 A12/4000 AC Digital Servo motor and Dual amplifier
- 1 A20/4000 AC Digital Servomotor
- Crowning software for cosine and compound crowns
- Tapers full length, one end, or both ends
- End and continuous infeed
- Short Stroking
- Bed error compensation
- Taper compensation
- Part shape compensation
- Part History Database
- Plunge Grinding Cycle
- Rough, Finish, and Sparkout Cycles
- RPM Readout of Wheel and Work Speeds
- Programmable Wheel Dressing Cycles
|
EQUIPPED WITH:
- 1 Machine Bed
- 1 Machine Carriage , Two piece type for manual taper adjustment
- 1 Headstock, Complete
- 1 Tailstock, Manual, Complete
- 1 Wheelhead assembly and applicable guarding, Complete
- 1 CNC System as described
- 1 Spindle lubrication and table way lubrication system, floor mounted, Complete
- 1 Infeed Lubrication system, machine mounted
- 1 Wheel mount
- 2 Dead Centers
- 1 Wheel Load meter, analog
- 1 Tailstock mounted wheel dresser with diamond
- Operator's and parts manual
- CNC maintenance and programming manuals
- Steel Telescoping Way Covers
- Coolant Splash Guards
- Heidenhain Feedback scale
|
OPTIONAL EQUIPMENT:
1. Steady rests for grinding small diameter rolls between centers
2. Additional Wheel Mounts
3. Coolant Flow Meter at wheel head to monitor flow of coolant and abort operation when coolant is not present
4. Automatic wheel size compensation for dressing cycle
5. Automatic roll touch-off feature using an audible sensor
5.1 SBS Controller Card
5.2 SBS Audible Sensor for automatic wheel touch-off
5.3 SBS Cable for Sensor
6. Estimated Labor to install and integrate system
7. Barnes MPE-15 Coolant System consisting of:
- Sludge pan and trial roll of paper
- M-6013, 1/4 hp Drive motor
- T-1441 Coolant tank, 53" x 34 3/8" x 12", cap. 78 gal.
Includes cover and lifting brackets
- CP-5029 Immersed Centrifugal Coolant Pump, 24 gpm. At 20 psi.
- E-5664 Special Electrical Control with flanged mounted fused disconnect, magnetic starters for drive motor and
Pump motor
8. Labor to install coolant system and interface to CNC
9. SBS Automatic Wheel Balancing System |
| INSTALLATION |
Installation of the machine in the customer's facility by Abbott personnel is included in the sale price. The customer will be responsible for:
- Providing incoming electrical service to the machine foundation.
- Final connection of incoming electrical service.
- Rigging and or crane service and all rigging materials.
- Providing a minimum of one maintenance person to assist with the installation.
|
| COST |
Price: On Request
Terms of Service: 30% with order, 30% upon CNC arrival, 30% upon runoff at Abbot, 10% 30 days after installation and acceptance in customer's facility.
F.O.B. Alton, Illinois
DELIVERY: 16 - 20 weeks ARO and Downpayment |
|
